[. . . ] Never use thinners, benzene, or other similar solvents to clean the instrument. When tilting the multi toms, be careful that the drum heads or hoops do not hit the holder when doing so. [. . . ] To determine the angle, tilt the carrying ??? Arm ?? ????????The snare drum can be flipped up as shown at left to transport it or when changing marching formations. Be careful that the drum head or hoop does not come into contact with the holder. Loosen the angle adjustment nuts, located on the left and right sides. ??? A When tilting the drum up or returning it to its playing position, keep your hands away from the areas marked A as shown in the diagram on the left. Use the supplied wrench to tighten and ????????? Angle Adjustment Nut secure the angle adjustment nuts making sure both sides are level. ??????????????????????? Assemble the carrying holder as shown in the diagram below. Also, to provide the optimum playing position, the height and angle of the snare head is adjustable. ??? ? The height of the arm can be changed to set the height of the drum Do not use this hole unless the harness must be extended to its full length. ? ???????????????????????? The shoulder width and height of the shoulder rests are adjustable. [. . . ] ????????????? ????????? Angle Adjustment Nut secure the angle adjustment nuts making sure both sides are level. ????????????????? A The snare drum can be flipped up as shown at left to transport it or when changing marching formations. [. . . ]